Skip to content

Model-Based Dependability Evaluation of Complex Critical Control Systems

Computer systems used in critical control applications are rapidly growing in complexity, featuring a very high number of requirements together with large, distributed and heterogeneous architectures, both at the hardware and software levels. Their dependability requirements are even more demanding, calling for more detailed analyses in order for the system to be evaluated against them. Complex systems are usually evaluated against safety requirements using simulation based techniques, while formal methods are used to verify only limited parts of the system. When evaluating system as a whole (i.e. as a “black-box”), the simulation techniques belong to the class of functional testing. Traditional functional testing techniques reveal inadequate for the verification of modern control systems, for their increased complexity and criticality properties. Such inadequateness is the result of two factors: the first is specification inconsistency (impacting on testing effectiveness), the second is test-case number explosion (impacting on testing efficiency). In particular, as the complexity of the system grows up, it is very difficult (nearly impossible) to develop a stable system requirements specification. This is a traditional problem, which is even more critical with nowadays control systems, featuring thousands of functional requirements and articulated architectures. Accurately revising natural language specification only reduces the problem. Missing requirements can be added at any time, others are continuously modified; negative requirements are usually stably missing. Another problem which is not addressed by traditional techniques is the impossibility to bias the test set in order to balance test effectiveness (number of potentially discovered errors) and efficiency (time required for test execution). Grey-box approaches allow to measure test-effectiveness by integrating the code coverage measurement; however, a stronger integration between static and dynamic analyses techniques is needed to enhance functional testing. To cope with the aforementioned issues, in this thesis we present a hybrid and grey-box functional testing technique based on influence variables and reference models (e.g. UML class and state diagrams) which is aimed at making functional testing of critical systems both feasible and cost-effective. While component or even subsystem level reliability can be evaluated quite easily, when availability has to be evaluated against system level requirements for non trivial failure modes, together with maintainability constraints, no traditional technique (e.g. Faul Trees) seems to be adequate. To cope with such issue, designers use to specify more conservative constituent level requirements, ensuring feasibility at a higher expense. However, more strict constituent level requirements feature two disadvantages: as first, system level availability target is not guaranteed to be fulfilled, as it depends on non straightforward architectural dependencies (i.e. how constituent are connected and interact with each other); secondly, even though more strict constituent level reliability requirements would ensure the accomplishment of global availability goals, this would imply a non balanced allocation of costs, as developers would not be able to fine tune system reliability parameters. The impossibility to correctly size reliability parameters according to structural dependencies is very likely to take to over-dimension some components and under-dimension some others, with a negative cost impact. A combination of techniques is therefore needed to perform system level availability modeling of complex heterogeneous control systems, considering both structural and behavioral studies. While a single highly expressive formalism (e.g. high-level Petri Nets) could be adopted to model the entire system from an availability point of view, there are at least two issues which are related to such choice: the first is efficiency, as the more expressive formalism usually features more complex solving algorithms; the second is ease of use, as the more expressive formalisms usually require a skilled modeler. The former issue is such to impede the application of an entire class of formalisms to large systems (e.g. for the state-space explosion problem). The explicit use of more formalisms allow modelers to fine tune the choice of the formalism to the needed modeling power. Furthermore, implicit multiformalism allows modelers to specify new formalisms out of existing ones, thus allowing to combine enhanced power, better efficiency and increased ease of use (the complexity of the solving process is hidden to the modeler). In this thesis we show how multiformalism approaches apply to critical control systems for system availability evaluation purposes.

CONSULTA INTEGRALMENTE QUESTA TESI

La consultazione è esclusivamente in formato digitale .PDF

Acquista
Mostra/Nascondi contenuto.
INTRODUCTION 8 Introduction Computer systems used in critical control applications are rapidly growing in complexity, featuring a very high number of requirements together with large, distributed and heterogeneous architectures, both at the hardware and software levels. Their dependability requirements are even more demanding, calling for more detailed analyses in order for the system to be evaluated against them. Complex systems are usually evaluated against safety requirements using simulation based techniques, while formal methods are used to verify only limited parts of the system. When evaluating system as a whole (i.e. as a “black-box”), the simulation techniques belong to the class of functional testing. Traditional functional testing techniques reveal inadequate for the verification of modern control systems, for their increased complexity and criticality properties. Such inadequateness is the result of two factors: the first is specification inconsistency (impacting on testing effectiveness), the second is test-case number explosion (impacting on testing efficiency). In particular, as the complexity of the system grows up, it is very difficult (nearly impossible) to develop a stable system requirements specification. This is a traditional problem, which is even more critical with nowadays control systems, featuring thousands of functional requirements and articulated architectures. Accurately revising natural language specification only reduces the problem. Missing requirements can be added at any time, others are continuously modified; negative requirements are usually stably missing. The ideal thing is to have a testing approach which retains a certain independence from system specification, more focused on the variables which influence system behavior (which do not change as long as system architecture is kept unvaried); besides guaranteeing a higher level of coverage, such an approach would be also effective in detecting missing requirements. Another problem which is not addressed by traditional techniques is the impossibility to bias the test set in order to balance test effectiveness (number of potentially discovered errors) and efficiency (time required for the execution). Grey-box approaches allow to measure test- effectiveness by integrating the code coverage measurement; however, a stronger integration between static and dynamic analyses techniques is needed to enhance functional testing. To cope with the aforementioned issues, in this thesis we present a hybrid and grey-box functional testing technique based on influence variables and reference models (e.g. UML class and state diagrams) which is aimed at making functional testing of critical systems both feasible and cost-effective (in other words, with respect to traditional approaches test coverage increases and execution time decreases). While some examples of model based testing are referenced in the research literature, it is a matter of fact that such methods are either too much theoretical or too much specific, missing the goal to provide a general approach which is suitable to all classes of complex critical systems. It is no surprise that testing remains the field of system and software engineering where the biggest gap exists between the theory and the practice; however, it is also the most critical industrial activity in terms of needed results, budget and time, and these are significant reasons to concentrate research efforts on it. While component or even subsystem level reliability can be evaluated quite easily, when availability has to be evaluated against system level requirements for non trivial failure modes, together with maintainability constraints, no traditional technique (Faul Trees, Markov Chains, etc.) seems to be adequate. To cope with such issue, designers use to specify more conservative constituent level requirements, ensuring feasibility at a higher expense. However, more strict constituent level requirements feature two disadvantages: as first, system level availability target is not guaranteed to be fulfilled, as it depends on non straightforward architectural dependencies (i.e. how constituent are connected and interact with each other); secondly, even though more strict constituent level reliability requirements would ensure the accomplishment of global availability goals, this would imply a non balanced allocation of costs, as developers would not be able to fine tune system reliability

CONSULTA INTEGRALMENTE QUESTA TESI

La consultazione è esclusivamente in formato digitale .PDF

Acquista
Il miglior software antiplagio

L'unico servizio antiplagio competitivo nel prezzo che garantisce l'aiuto della nostra redazione nel controllo dei risultati.
Analisi sicura e anonima al 100%!
Ottieni un Certificato Antiplagio dopo la valutazione.

Informazioni tesi

  Autore: Francesco Flammini
  Tipo: Tesi di Dottorato
Dottorato in Dottorato di Ricerca in Ingegneria Informatica e Automatica
Anno: 2006
Docente/Relatore: Antonino Mazzeo
Correlatore: NicolaMazzoccaValeriaVittorini
Istituito da: Università degli Studi di Napoli - Federico II
Dipartimento: Dipartimento di Informatica e Sistemistica
  Lingua: Inglese
  Num. pagine: 142

FAQ

Per consultare la tesi è necessario essere registrati e acquistare la consultazione integrale del file, al costo di 29,89€.
Il pagamento può essere effettuato tramite carta di credito/carta prepagata, PayPal, bonifico bancario.
Confermato il pagamento si potrà consultare i file esclusivamente in formato .PDF accedendo alla propria Home Personale. Si potrà quindi procedere a salvare o stampare il file.
Maggiori informazioni
Ingiustamente snobbata durante le ricerche bibliografiche, una tesi di laurea si rivela decisamente utile:
  • perché affronta un singolo argomento in modo sintetico e specifico come altri testi non fanno;
  • perché è un lavoro originale che si basa su una ricerca bibliografica accurata;
  • perché, a differenza di altri materiali che puoi reperire online, una tesi di laurea è stata verificata da un docente universitario e dalla commissione in sede d'esame. La nostra redazione inoltre controlla prima della pubblicazione la completezza dei materiali e, dal 2009, anche l'originalità della tesi attraverso il software antiplagio Compilatio.net.
  • L'utilizzo della consultazione integrale della tesi da parte dell'Utente che ne acquista il diritto è da considerarsi esclusivamente privato.
  • Nel caso in cui l’utente che consulta la tesi volesse citarne alcune parti, dovrà inserire correttamente la fonte, come si cita un qualsiasi altro testo di riferimento bibliografico.
  • L'Utente è l'unico ed esclusivo responsabile del materiale di cui acquista il diritto alla consultazione. Si impegna a non divulgare a mezzo stampa, editoria in genere, televisione, radio, Internet e/o qualsiasi altro mezzo divulgativo esistente o che venisse inventato, il contenuto della tesi che consulta o stralci della medesima. Verrà perseguito legalmente nel caso di riproduzione totale e/o parziale su qualsiasi mezzo e/o su qualsiasi supporto, nel caso di divulgazione nonché nel caso di ricavo economico derivante dallo sfruttamento del diritto acquisito.
L'obiettivo di Tesionline è quello di rendere accessibile a una platea il più possibile vasta il patrimonio di cultura e conoscenza contenuto nelle tesi.
Per raggiungerlo, è fondamentale superare la barriera rappresentata dalla lingua. Ecco perché cerchiamo persone disponibili ad effettuare la traduzione delle tesi pubblicate nel nostro sito.
Per tradurre questa tesi clicca qui »
Scopri come funziona »

DUBBI? Contattaci

Contatta la redazione a
[email protected]

Ci trovi su Skype (redazione_tesi)
dalle 9:00 alle 13:00

Oppure vieni a trovarci su

Parole chiave

anomaly simulation environments
bayesian networks (bn)
certification standards (cenelec)
code / configuration coverage
complexity management
connection / composition operators
critical control systems
dependability evaluation / prediction
european railway traffic management (ertms / etcs)
formal methods, functional testing
generalized stochastic petri nets (gspn)
model-based static & dynamic analysis
multiformalism in the osmosys framework
performability modeling
railway interlocking
reliability availability maintainability safety
repairable fault trees (rft)
reverse engineering (structural & behavioral)
unified modeling language (uml)
verification & validation, rams

Tesi correlate


Non hai trovato quello che cercavi?


Abbiamo più di 45.000 Tesi di Laurea: cerca nel nostro database

Oppure consulta la sezione dedicata ad appunti universitari selezionati e pubblicati dalla nostra redazione

Ottimizza la tua ricerca:

  • individua con precisione le parole chiave specifiche della tua ricerca
  • elimina i termini non significativi (aggettivi, articoli, avverbi...)
  • se non hai risultati amplia la ricerca con termini via via più generici (ad esempio da "anziano oncologico" a "paziente oncologico")
  • utilizza la ricerca avanzata
  • utilizza gli operatori booleani (and, or, "")

Idee per la tesi?

Scopri le migliori tesi scelte da noi sugli argomenti recenti


Come si scrive una tesi di laurea?


A quale cattedra chiedere la tesi? Quale sarà il docente più disponibile? Quale l'argomento più interessante per me? ...e quale quello più interessante per il mondo del lavoro?

Scarica gratuitamente la nostra guida "Come si scrive una tesi di laurea" e iscriviti alla newsletter per ricevere consigli e materiale utile.


La tesi l'ho già scritta,
ora cosa ne faccio?


La tua tesi ti ha aiutato ad ottenere quel sudato titolo di studio, ma può darti molto di più: ti differenzia dai tuoi colleghi universitari, mostra i tuoi interessi ed è un lavoro di ricerca unico, che può essere utile anche ad altri.

Il nostro consiglio è di non sprecare tutto questo lavoro:

È ora di pubblicare la tesi